From 3ed1ee7954ec22ffe541ce764109000696b8e087 Mon Sep 17 00:00:00 2001 From: Martin Benonisen Date: Mon, 18 Mar 2024 11:46:02 +0100 Subject: [PATCH] nizplz --- configuration.nix | 227 +++++++++++++++++++++++++++++++++++++ hardware-configuration.nix | 39 +++++++ 2 files changed, 266 insertions(+) create mode 100644 configuration.nix create mode 100644 hardware-configuration.nix diff --git a/configuration.nix b/configuration.nix new file mode 100644 index 0000000..41b6476 --- /dev/null +++ b/configuration.nix @@ -0,0 +1,227 @@ +# Edit this configuration file to define what should be installed on +# your system. Help is available in the configuration.nix(5) man page +# and in the NixOS manual (accessible by running ‘nixos-help’). + +{ config, pkgs, ... }: +let + unstable = import {config = { allowUnfree = true; };}; +in +{ + # Enable OpenGL + hardware.opengl = { + enable = true; + driSupport = true; + driSupport32Bit = true; + }; + hardware.ckb-next.enable = true; + networking.firewall.enable = false; + # Load nvidia driver for Xorg and Wayland + services.xserver.videoDrivers = ["nvidia"]; # or "nvidiaLegacy470 etc. + security.polkit.enable = true; + environment.pathsToLink = [ "/libexec" ]; + hardware.nvidia = { + + # Modesetting is required. + modesetting.enable = true; + + # Nvidia power management. Experimental, and can cause sleep/suspend to fail. + # Enable this if you have graphical corruption issues or application crashes after waking + # up from sleep. This fixes it by saving the entire VRAM memory to /tmp/ instead + # of just the bare essentials. + powerManagement.enable = false; + + # Fine-grained power management. Turns off GPU when not in use. + # Experimental and only works on modern Nvidia GPUs (Turing or newer). + powerManagement.finegrained = false; + + # Use the NVidia open source kernel module (not to be confused with the + # independent third-party "nouveau" open source driver). + # Support is limited to the Turing and later architectures. Full list of + # supported GPUs is at: + # https://github.com/NVIDIA/open-gpu-kernel-modules#compatible-gpus + # Only available from driver 515.43.04+ + # Currently alpha-quality/buggy, so false is currently the recommended setting. + open = false; + + # Enable the Nvidia settings menu, + # accessible via `nvidia-settings`. + nvidiaSettings = true; + + # Optionally, you may need to select the appropriate driver version for your specific GPU. + package = config.boot.kernelPackages.nvidiaPackages.stable; + }; + imports = + [ # Include the results of the hardware scan. + ./hardware-configuration.nix + ]; + + # Bootloader. + boot.loader.systemd-boot.enable = true; + boot.loader.efi.canTouchEfiVariables = true; + + networking.hostName = "nixos"; # Define your hostname. + # networking.wireless.enable = true; # Enables wireless support via wpa_supplicant. + + # Configure network proxy if necessary + # networking.proxy.default = "http://user:password@proxy:port/"; + # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain"; + + # Enable networking + networking.networkmanager.enable = true; + + # Set your time zone. + time.timeZone = "Europe/Oslo"; + + # Select internationalisation properties. + i18n.defaultLocale = "en_US.UTF-8"; + + # Enable the X11 windowing system. + services.xserver.enable = true; + + + # Configure keymap in X11 + services.xserver = { + layout = "us"; + xkbVariant = ""; + }; + + # Enable CUPS to print documents. + services.printing.enable = true; + + # Enable sound with pipewire. + sound.enable = true; + hardware.pulseaudio.enable = false; + security.rtkit.enable = true; + services.pipewire = { + enable = true; + alsa.enable = true; + alsa.support32Bit = true; + pulse.enable = true; + # If you want to use JACK applications, uncomment this + #jack.enable = true; + + # use the example session manager (no others are packaged yet so this is enabled by default, + # no need to redefine it in your config for now) + #media-session.enable = true; + }; + + programs.zsh.enable = true; + # Enable touchpad support (enabled default in most desktopManager). + # services.xserver.libinput.enable = true; + users.defaultUserShell = pkgs.zsh; + # Define a user account. Don't forget to set a password with ‘passwd’. + users.users.mbeno = { + shell = pkgs.zsh; + isNormalUser = true; + description = "Martin"; + extraGroups = [ "networkmanager" "wheel" "docker" ]; + packages = with pkgs; [ + firefox + alacritty + mumble + zoom + mattermost-desktop + # thunderbird + ]; + }; +programs.steam = { + enable = true; + remotePlay.openFirewall = true; # Open ports in the firewall for Steam Remote Play + dedicatedServer.openFirewall = true; # Open ports in the firewall for Source Dedicated Server +}; + +security.sudo.extraRules= [ + { users = [ "mbeno" ]; + commands = [ + { command = "ALL" ; + options= [ "NOPASSWD" ]; # "SETENV" # Adding the following could be a good idea + } + ]; + } +]; + # Allow unfree packages + nixpkgs.config.allowUnfree = true; + services.xserver = { + + desktopManager = { + xterm.enable = false; + }; + + displayManager = { + defaultSession = "none+i3"; + autoLogin.enable = true; + autoLogin.user = "mbeno"; + }; + + windowManager.i3 = { + enable = true; + extraPackages = with pkgs; [ + dmenu #application launcher most people use + i3status # gives you the default i3 status bar + i3lock #default i3 screen locker + i3blocks #if you are planning on using i3blocks over i3status + polybar + rofi + picom + nitrogen + ]; + }; + }; +systemd = { + user.services.polkit-gnome-authentication-agent-1 = { + description = "polkit-gnome-authentication-agent-1"; + wantedBy = [ "graphical-session.target" ]; + wants = [ "graphical-session.target" ]; + after = [ "graphical-session.target" ]; + serviceConfig = { + Type = "simple"; + ExecStart = "${pkgs.polkit_gnome}/libexec/polkit-gnome-authentication-agent-1"; + Restart = "on-failure"; + RestartSec = 1; + TimeoutStopSec = 10; + }; + }; +}; + # List packages installed in system profile. To search, run: + # $ nix search wget + environment.systemPackages = with pkgs; [ + steam-run + xdg-utils + xdg-desktop-portal + xdg-desktop-portal-gtk + unstable.zoom-us + neovim + git + # vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default. + # wget + ]; + + virtualisation.docker.enable = true; + # Some programs need SUID wrappers, can be configured further or are + # started in user sessions. + # programs.mtr.enable = true; + # programs.gnupg.agent = { + # enable = true; + # enableSSHSupport = true; + # }; + + # List services that you want to enable: + + # Enable the OpenSSH daemon. + # services.openssh.enable = true; + + # Open ports in the firewall. + # networking.firewall.allowedTCPPorts = [ ... ]; + # networking.firewall.allowedUDPPorts = [ ... ]; + # Or disable the firewall altogether. + # networking.firewall.enable = false; + + # This value determines the NixOS release from which the default + # settings for stateful data, like file locations and database versions + # on your system were taken. It‘s perfectly fine and recommended to leave + # this value at the release version of the first install of this system. + # Before changing this value read the documentation for this option + # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html). + system.stateVersion = "23.11"; # Did you read the comment? + +} diff --git a/hardware-configuration.nix b/hardware-configuration.nix new file mode 100644 index 0000000..f5dc983 --- /dev/null +++ b/hardware-configuration.nix @@ -0,0 +1,39 @@ +# Do not modify this file! It was generated by ‘nixos-generate-config’ +# and may be overwritten by future invocations. Please make changes +# to /etc/nixos/configuration.nix instead. +{ config, lib, pkgs, modulesPath, ... }: + +{ + imports = + [ (modulesPath + "/installer/scan/not-detected.nix") + ]; + + boot.initrd.availableKernelModules = [ "vmd" "xhci_pci" "ahci" "nvme" "usbhid" "usb_storage" "sd_mod" ]; + boot.initrd.kernelModules = [ ]; + boot.kernelModules = [ "kvm-intel" ]; + boot.extraModulePackages = [ ]; + + fileSystems."/" = + { device = "/dev/disk/by-uuid/d05743bb-9448-483b-8002-caa0da402820"; + fsType = "ext4"; + }; + + fileSystems."/boot" = + { device = "/dev/disk/by-uuid/4B24-7005"; + fsType = "vfat"; + }; + + swapDevices = + [ { device = "/dev/disk/by-uuid/796cc9db-33c0-446e-8be6-02ae63461c19"; } + ]; + + # Enables DHCP on each ethernet and wireless interface. In case of scripted networking + # (the default) this is the recommended approach. When using systemd-networkd it's + # still possible to use this option, but it's recommended to use it in conjunction + # with explicit per-interface declarations with `networking.interfaces..useDHCP`. + networking.useDHCP = lib.mkDefault true; + # networking.interfaces.enp4s0.useDHCP = lib.mkDefault true; + + nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux"; + hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware; +}